Kansei Tandem Wheels Studs and Lug Nuts Should Always Be In Decent Condition

Precaution is necessary for Kansei tandem wheels condition to be in the best condition before you start your holiday trip on road. If you are substituting any damaged studs, you’ll also need to trade the two adjacent studs. If any more than two studs need substituting, you’ll have to swap out all 10 of them. You’ll also need to safeguard that the hub pilots don’t have any impairment or excessive wear that would originate the mounting to be off-centre. You can reuse some portions if you inspect them methodically for quality and security.

Studs and lug nuts should be in decent condition, with no thread impairment or widening, and bearings should be inspected for drag on the rollers and other signs of damage or wear. If you’re mounting a pair of Kansei tandem wheels, make sure that the span on each is the same. Any small alteration can contribute to untimely tire wear, which will result in the bad shape of a wheel. Proper tools are indispensable, especially during the torquing procedure. Using a power tool to tighten the lug nuts is satisfactory, but you should never use an impact wrench to attain the concluding torque. Only use standardized torquing tools for Kansei off-road wheels.

A proper torque wrench must be used to add the precise amount of pressure. When you torque, you add tension, and smearing both torque and friction to the stud generates a clamping force. Suitable clamping force is required, as this is what keeps the tire in place. Too much or too little power can cause the fasteners to fail, and they both behave likewise. There are specified fastener approvals between 300 and 900 ft/lbs. You’ll want to check these grounded on the type of Kansei off-road wheels, fastener, and process you will use. Occasionally, however, these need to be accustomed according to the installation process, manufacturer recommendations, or fleet specifications.